Choice of material for the kitchen units

Today we went to the big kitchen materials store to try and choose all the boards and mechanisms. While we managed to select the cupboard and drawer mechanisms and the face detail for the doors there was a conflict of opinion on the colour and finish for the kitchen units themselves. There was also quite a wide selection of handles to choose from, but we’ll leave that until we decide on the material.

We did manage to get it down to a shortlist of about three. The type of material we went looking for was laminated MDF and the stock in the store was mainly the EGGER brand which, on checking them out more thoroughly, seems to be the most reliable brand we could see there. Another brand we looked at was CLEAF but this turned out to be laminated particle board (chipboard) so they didn’t make the shortlist.

With all manufactured materials like this there is a safety element to consider, which is the slow release of formaldehyde which is used in the bonding agent. I did find a safety data sheet for the EGGER material which says it meets Emission class E1 of EN120, which means that it just meets it or it greatly betters it - I suspect the former but I think we’ll be safe with it being laminated too.

1) CLEAF S070 SHERWOOD

This was Lana’s favourite but my first impression of this one was that it would look terrible - a really fake wood effect… and the colour just isn’t something I could get used to, ever. We’d decided against getting a real wood kitchen so I don’t see the point in trying to emulate the effect we’ve already decided against.

Having now seen their catalogue I’m somewhat relieved to find that this is not laminated MDF - it’s laminated chipboard so that rules this one out.image

2) EGGER H1394 SAND CREMONA OAK

I suppose this was my alternative choice if we HAD to go for a wood effect - against all logic (see my reasoning above). This is laminated MDF and ,while it looks a rather good and less expensive alternative to real wood I’m not sure it would look so great once we’d had the full kitchen built out of it - it would make good office furniture.

H1394_ST9_560x410.jpg (560×410)

3) EGGER F425 ST10 BEIGE LINEN

Lana quite liked this one. I thought it looked ok but, perhaps, a bit too cold (a grey beige instead of a warmer shade). Again this is laminated MDF - I think this one makes the shortlist.

4) EGGER F427 ST10 BEIGE LEATHER

This one caught my eye because of the warmer tone and it may go well with the floor and the dark brown quartz countertop we want, but it may actually be a little too dark.

surface

In conclusion from what we actually saw in stock it seems to be a choice between the EGGER F425 (Beige Linen) and F427 (Beige Leather). If, as I suspect, the Beige Leather is a bit too dark then I am leaning towards the Beige Linen - particularly when you compare this to the full range of similar materials. They do have a Grey Linen there which is distinctly grey, and the Beige Linen does seem to have a hint of beige about it.

If we don’t like it we can re-model the kitchen in a few years!

As far as the style of door we liked these two styles - the rounded top version particularly so:

image